This sign means you must not make a U-turn at this location. It is commonly placed at intersections, highways, or curves where turning around would be unsafe or disruptive to traffic flow.

The No Entry sign indicates that no vehicles are permitted to enter the road from this direction. It is typically placed at the exit of one-way streets to prevent vehicles from entering against the flow of traffic. Ignoring this sign can lead to serious accidents or traffic violations.

The No Stopping sign means that drivers are not allowed to stop their vehicle at all, not even briefly, for any reason—unless directed by a police officer or in an absolute emergency. This rule helps prevent traffic congestion and ensures clear passage, especially in high-risk or high-speed zones like tunnels, bridges, or intersections.

As you approach a bridge, especially one with limited visibility, consider using your horn to alert other drivers of your presence. This is particularly useful on narrow or humpback bridges where oncoming vehicles may not be visible until the last moment. Always approach bridges with caution, especially narrow or blind ones. Using your horn can help prevent collisions and ensure a safer crossing.

Elderly drivers may have slower reaction times due to age-related factors. It’s important to be patient and give them enough space to react to road conditions. Driving too close or trying to rush them could increase the risk of an accident. Always anticipate that they may brake or turn more slowly than younger drivers.

To correct a rear-wheel skid, you should steer in the same direction as the skid (steer into it). This helps you regain control by aligning the wheels with the direction of travel. Avoid sudden braking or acceleration, as this can make the skid worse.

If you are driving behind a large goods vehicle that signals left but steers to the right, you should slow down and let the vehicle turn. Large vehicles often need extra space to make turns, and they may signal one direction while steering in the opposite direction to maneuver safely. It’s important to give them room and wait until it's safe to proceed.

Driving with under-inflated tyres can affect fuel consumption. When tyres are under-inflated, they create more rolling resistance, which forces the engine to work harder, leading to higher fuel consumption.

When descending a steep hill, you should use first gear to control your speed. First gear provides the maximum engine braking, helping you maintain control of your vehicle and preventing it from gaining too much speed. Using a higher gear or putting the car in neutral could cause the vehicle to pick up speed more quickly, making it harder to control. Always use a low gear when descending steep hills.

A properly serviced vehicle runs more efficiently, which can improve fuel economy and overall performance. Regular maintenance, such as oil changes, tire checks, and engine servicing, helps the vehicle operate at its best.

To warn following traffic that the traffic ahead is slowing down sharply, you should briefly use the hazard warning lights. This is a clear signal to other drivers that they should slow down and be cautious.

This indicates that all vehicles, regardless of type, are not allowed to enter from that direction. It's a strict restriction on access.

According to the Ghana Highway Code, Red means: "STOP. Wait behind the stop line on the carriageway."
Amber means: "STOP at the stop line." If you have already crossed the white line when the light turns amber, you should proceed with caution. If you have not crossed the white line yet, you must stop.

At Y junctions, vehicles joining the major road generally have restricted priority over vehicles already on the major road. Drivers on the main road typically have the right of way unless otherwise indicated by signs or road markings.

The road sign shown indicates a Sharp Reverse Curve to Right.

A "Sharp Reverse Curve to Right" sign warns drivers of two sharp bends ahead-first to the right, then immediately to the left. Drivers should slow down and navigate carefully.

The indicated sign is Loose Gravel Road Sign.

The Loose Gravel Road Sign sign warns that there may be loose stones or gravel on the road surface ahead, which can reduce traction and pose a hazard to vehicles, especially when braking or turning.

That’s a Slippery Road Ahead.

This Slippery Road Ahead sign warns drivers that the surface ahead may be slippery, especially when wet. Drivers should reduce speed and avoid sudden maneuvers.

The correct answer is "Level Crossing 90m Ahead".

This sign means there’s a railway crossing 90 metres ahead. Be alert, slow down, and get ready to stop if a train is coming.

The correct answer is "Level Crossing 60m Ahead".

This sign means a railway crossing is 60 metres ahead. Slow down and look both ways for trains. Be ready to stop if one is coming.

The correct answer is "No Through Road on Left".

This sign means the road on your left doesn’t go through. Only turn left if you really need to.