This sign restricts goods vehicles longer than 10 metres from entering the road ahead. It's used in areas with tight bends, narrow roads, or weight/length restrictions, where long vehicles could pose a hazard or block traffic flow.

The No Left Turn sign indicates that drivers are prohibited from making a left turn at the junction ahead. It is usually placed where turning left could be dangerous or disruptive to the flow of traffic, such as at busy intersections or narrow roads.

The No Entry sign indicates that no vehicles are permitted to enter the road from this direction. It is typically placed at the exit of one-way streets to prevent vehicles from entering against the flow of traffic. Ignoring this sign can lead to serious accidents or traffic violations.

Parking very close alongside another vehicle is called double parking, not tailgating. Tailgating refers to following another vehicle too closely while driving, which is dangerous as it reduces reaction time in case of sudden braking.

Before starting your engine, your seat should be adjusted for height to ensure proper visibility of the road, mirrors, and dashboard. This also helps you reach the pedals comfortably and maintain a safe driving posture.

A driver should allow a two-second stopping gap when following all vehicles, including cars, trucks, and motorbikes. This gap provides enough time to react and stop in case the vehicle in front of you suddenly brakes. The two-second rule is a basic safety measure to ensure sufficient distance and avoid collisions.

Your reaction time will be much slower when you are tired, as fatigue reduces alertness, concentration, and the ability to respond quickly to hazards. Driving while tired increases the risk of accidents, so it's important to take breaks and rest if you feel drowsy.

You should pull into a passing space on your right because it's safer and more common to give way to the vehicle coming from the opposite direction. This helps avoid the need for both vehicles to reverse.

When approaching a parked vehicle with a driver seated inside, always be mindful that the door may be opened suddenly. This could obstruct your path or cause a collision, especially if you're driving too close to the parked vehicle.

When you notice a ball bouncing into the road ahead, it’s likely that children are nearby and may run after it. Slowing down and being prepared to stop allows you to react quickly and safely if children unexpectedly run into the road.

You should keep well back when following a large vehicle because it allows the driver to see you in his mirrors. Large vehicles have significant blind spots, especially behind them. If you follow too closely, the driver may not be able to see you, increasing the risk of an accident. Keeping a safe distance ensures visibility and gives you more time to react if the large vehicle suddenly slows down or stops.

When crossing traffic, it’s important to cross with care. This means you should ensure it’s safe to do so, check for oncoming traffic, and cross only when it is clear. Always make sure you have enough space and time to safely maneuver, rather than rushing or crossing immediately.

Road humps (ramps) are designed to slow down vehicles for safety. Driving too fast over them can damage your vehicle and cause discomfort. Always reduce speed when approaching and crossing road humps.

Manufactured during the fifty-first week of 2007

To determine the manufacturing date of a tire, look at the last four digits of the Tyre Identification Number (TIN) found on the sidewall. These digits represent the week and year of manufacture.

For example, if the number is 5107:

• 51 = 51st week of the year
• 07 = Year 2007

This means the tire was manufactured during the fifty-first week of 2007

If a warning light appears on your instrument panel, it’s important to check out the problem quickly and safely. Ignoring warning lights can lead to more serious issues or even damage to your vehicle. If you’re unsure of the problem, it’s best to pull over safely and assess the situation or consult the vehicle’s manual for guidance. Continuing to drive without addressing the issue could compromise your safety or the vehicle's performance.

The total stopping distance is the sum of the thinking distance and the braking distance.

So, for this vehicle:

• Thinking distance = 18 metres
• Braking distance = 55 metres

Total stopping distance = 18 metres + 55 metres = 73 metres

The vehicle's total stopping distance will be 73 metres.

If the engine oil level is above the maximum mark, you should drain the excess from the sump to prevent engine damage. Overfilled oil can cause excessive pressure, leading to leaks, seal damage, or even engine failure.

To warn following traffic that the traffic ahead is slowing down sharply, you should briefly use the hazard warning lights. This is a clear signal to other drivers that they should slow down and be cautious.

Hazard warning lights should be used when you are stopped in an emergency to alert other drivers of a potential danger. They help warn others to proceed with caution.

Hazard lights are not used to thank other drivers, When parking briefly, or when overtaking. Their purpose is specifically to signal an emergency or a hazard on the road.

When you see signs with the inscriptions NO PARKING, NO WAITING, or NO STANDING, it means you are not allowed to stop, park, or wait in that area at any time. These restrictions are in place to ensure the flow of traffic and to keep roads clear for safety.

When you’re undergoing a practical driving course, you are typically required to display L plates (learner plates) on the vehicle. This alerts other road users that you are a learner driver and may need extra consideration. You should also always be accompanied by an instructor or a qualified supervising driver during the lessons.

When applying for a Learner’s Driving License in Ghana, you are typically required to submit:

• A certified eye test report to ensure you can see well enough to drive.
• A birth certificate to verify your age and eligibility.
• 4 recent passport photographs for identification purposes.

An approved driver instructor is not a requirement at the time of applying for a Learner’s Driving License, although you will need one for your driving lessons later.

This sign indicates Road Work Ahead.

It alerts drivers to construction or maintenance activities on the road ahead. Drivers should slow down, follow instructions, and watch out for workers and machinery.

This is a Falling Rocks sign.

Falling Rocks warns drivers that rocks or debris may fall onto the road from nearby hillsides. Proceed with caution, especially in mountainous or hilly terrain.

That’s a Slippery Road Ahead.

This Slippery Road Ahead sign warns drivers that the surface ahead may be slippery, especially when wet. Drivers should reduce speed and avoid sudden maneuvers.

The road sign shown indicates a Sharp Reverse Curve to Right.

A "Sharp Reverse Curve to Right" sign warns drivers of two sharp bends ahead-first to the right, then immediately to the left. Drivers should slow down and navigate carefully.

The correct answer is "End of Priority Road".

This sign warns that the section of road with priority is ending. Drivers should be ready to give way to cross traffic.

The correct answer is "Turn Right".

This sign means you must turn right when you get to the junction. You can’t go straight or turn left — right turn only.

The correct answer is "Keep Right".

This sign means you should drive on the right side of any obstacle or divider ahead. Always keep to the right as the sign shows.

The correct answer is "Route for Pedestrians Only".

Indicates that this path is only for people walking. Cyclists and vehicles must not use it.