The No Horn sign indicates that drivers should not use their horn in the area, often because it's a silent zone like near hospitals or schools.

Road humps (ramps) are designed to slow down vehicles for safety. Driving too fast over them can damage your vehicle and cause discomfort. Always reduce speed when approaching and crossing road humps.

When following a large vehicle, stay out of its blind spots by positioning your vehicle in a place where the driver can see you in their mirrors. These blind spots are usually located directly behind the vehicle, along the sides (especially the right side), and sometimes in front of the vehicle. To avoid these, ensure you:

• Position yourself slightly to the left of the large vehicle, staying visible in the driver's side mirror.
• Keep a safe distance so you aren't directly behind or too close to the vehicle.
• Pass the vehicle quickly when overtaking to minimize the time spent in their blind spots.

This will help you stay visible and reduce the risk of accidents.

The safest and most appropriate way to cross a clear road is to walk across it at a steady pace. Running or jumping can increase the risk of tripping or losing balance, while attempting to stop traffic yourself is unsafe and impractical. Always ensure the road is clear and use designated crossings where available.

Elderly drivers may have slower reaction times due to age-related factors. It’s important to be patient and give them enough space to react to road conditions. Driving too close or trying to rush them could increase the risk of an accident. Always anticipate that they may brake or turn more slowly than younger drivers.

If the engine oil level is above the maximum mark, you should drain the excess from the sump to prevent engine damage. Overfilled oil can cause excessive pressure, leading to leaks, seal damage, or even engine failure.

Parking lights (also called sidelights) are used when visibility is reduced but not enough to require full headlights. They help other road users see your vehicle, especially when parked on roads where lighting conditions are poor.

The total stopping distance is the sum of the thinking distance and the braking distance.

So, for this vehicle:

• Thinking distance = 18 metres
• Braking distance = 55 metres

Total stopping distance = 18 metres + 55 metres = 73 metres

The vehicle's total stopping distance will be 73 metres.

When your vehicle breaks down on a two-way road, you should place the warning triangle at least 45 metres behind your vehicle. This distance helps warn oncoming traffic about the obstruction and gives them enough time to react safely.

Warning signs are typically triangular in shape with a red border and a white background. These signs are used to alert drivers about potential hazards ahead, such as sharp bends, pedestrian crossings, or roadwork.

Drivers must switch to low beam headlights within 150 meters when approaching another vehicle at night to prevent blinding the other driver and ensure safe visibility for both vehicles.

The indicated sign is Loose Gravel Road Sign.

The Loose Gravel Road Sign sign warns that there may be loose stones or gravel on the road surface ahead, which can reduce traction and pose a hazard to vehicles, especially when braking or turning.

The sign shown is for Low Flying Aircraft.

This sign warns that low-flying aircraft may be present in the area, potentially causing sudden noise or distraction. Drivers should stay focused on the road.

The correct answer is "Priority Over Vehicle From Opposite Direction".

This sign means that vehicles on this road have the right-of-way over others entering or crossing it. But even with this advantage, drivers should still stay alert and exercise caution — not everyone might notice or obey the sign.

The correct answer is "Parking (P)".

This sign shows where you can park your vehicle safely and legally without breaking any traffic rules.