This sign prohibits goods vehicles, such as lorries and vans transporting cargo, from entering the road ahead. It’s typically placed in residential areas, city centers, or roads with structural limits, helping reduce noise, traffic, or potential damage.

The 3.5M sign is a height restriction, meaning vehicles taller than 3.5 metres are not allowed to pass under the structure ahead—usually a low bridge or tunnel. This helps prevent collisions with overhead structures.

The No Entry for Cyclists sign means bicycles are not allowed beyond this point. It is typically placed in areas where cycling could pose a risk to safety or disrupt traffic flow. Cyclists must take an alternative route.

The No Entry for Buses sign indicates that buses are prohibited from entering the road beyond this point. It’s often used on narrow or residential roads where large vehicles could cause congestion or pose a danger.

Road humps are designed to slow down traffic and improve safety. Driving too fast over them can damage your vehicle and make the ride uncomfortable. It's important to maintain a reduced speed at all times, not just during school hours.

To prevent feeling sleepy while driving long distances, stopping and walking around is the best solution. Taking breaks, stretching, and getting some fresh air can help you stay alert. Relying on coffee or speeding may not be effective in the long term and can be dangerous. Always prioritize safety by getting rest when needed.

When approaching a roundabout in Ghana, you should always give way to traffic on your left, as traffic flows on the right side of the road. This helps maintain a smooth and safe flow of vehicles around the roundabout.

To ensure safety on the road, you should allow other vehicles to overtake when they want to, as long as it is safe. Blocking or preventing overtaking can lead to frustration and risky maneuvers. However, never wave other vehicles to overtake, as it might mislead drivers about road conditions. Always focus on safe and legal driving practices.

If another driver upsets you in traffic, it's important to try not to react emotionally or aggressively. Flashing your headlights or sounding your horn can escalate the situation and increase the risk of conflict. Maintaining your composure and continuing to drive safely is the best course of action. Letting go of any frustration and focusing on safety will help keep the roads safer for everyone.

When approaching a parked vehicle with a driver seated inside, always be mindful that the door may be opened suddenly. This could obstruct your path or cause a collision, especially if you're driving too close to the parked vehicle.

When overtaking a motorcyclist in windy conditions, you should allow extra room. Wind can affect the stability of both your vehicle and the motorcycle, making it harder for the motorcyclist to control their bike. By giving them more space, you reduce the risk of causing an accident or startling the motorcyclist. Always exercise caution in adverse weather conditions.

A driver should allow a two-second stopping gap when following all vehicles, including cars, trucks, and motorbikes. This gap provides enough time to react and stop in case the vehicle in front of you suddenly brakes. The two-second rule is a basic safety measure to ensure sufficient distance and avoid collisions.

A driver should look far ahead of the vehicle while driving, typically aiming for a 12-15 second gap between their car and the one in front to allow enough time to react to potential hazards.

On a one-way street, overtaking can be done on either side, as traffic flows in a single direction. However, ensure it is safe to overtake and that you are not breaking any other road rules.

When following a large vehicle, stay out of its blind spots by positioning your vehicle in a place where the driver can see you in their mirrors. These blind spots are usually located directly behind the vehicle, along the sides (especially the right side), and sometimes in front of the vehicle. To avoid these, ensure you:

• Position yourself slightly to the left of the large vehicle, staying visible in the driver's side mirror.
• Keep a safe distance so you aren't directly behind or too close to the vehicle.
• Pass the vehicle quickly when overtaking to minimize the time spent in their blind spots.

This will help you stay visible and reduce the risk of accidents.

Driving while tired or unwell, especially with a severe headache, significantly impairs your reaction time, focus, and decision-making abilities. It’s crucial to ensure you are in good condition before getting behind the wheel to avoid accidents or endangering yourself and others. If you feel unwell, it's best to rest and only drive once you're fully fit.

If a warning light appears on your instrument panel, it’s important to check out the problem quickly and safely. Ignoring warning lights can lead to more serious issues or even damage to your vehicle. If you’re unsure of the problem, it’s best to pull over safely and assess the situation or consult the vehicle’s manual for guidance. Continuing to drive without addressing the issue could compromise your safety or the vehicle's performance.

Your car horn should be used as a safety tool to alert others of your presence, especially in situations where visibility is limited, or to prevent an accident.

When the fuel pump symbol (fuel warning light) on your dashboard is lit, it usually means:

🚨 Low Fuel Level – Your fuel tank is running low, and you should refuel soon to avoid running out of fuel.

However, in some cases, it can also indicate:
🔧 Fuel System Issue – If the light stays on even after refueling, there might be a problem with the fuel sensor, fuel pump, or fuel filter.

⚠️ What to Do?

• Refuel as soon as possible to avoid getting stranded.
• If the light stays on even after refueling, have a mechanic check the fuel system.

Seat belts are designed to restrain passengers and keep them securely in their seats during sudden stops or collisions, preventing occupants being thrown out in an emergency and reducing the risk of serious injury or ejection from the vehicle.

Fog lights are designed to be used in conditions where visibility is seriously reduced, such as during fog, heavy rain, or snow. They provide a low, wide beam of light to illuminate the road directly in front of the vehicle without causing glare, which can help the driver see better in such conditions. They should not be used when visibility is clear or when not required, as they may cause unnecessary distraction to other drivers.

For towing a vehicle, it’s best to use a metal bar rather than a rope or conveyor chain, as it provides better control and safety for both vehicles. A strong metal bar is a safer and more secure method for towing, especially on major roads.

In an emergency on a wet road, keep both hands on the steering wheel and apply the brakes gradually to avoid skidding and maintain control of the vehicle. Sudden braking or accelerating can cause you to lose traction.

The Uneven Road sign warns drivers about a rough or bumpy road surface ahead. This could be due to road repairs, potholes, or natural terrain changes. Drivers should reduce speed and proceed with caution to maintain control of their vehicle.

When traffic lights are out of order, no one has automatic priority. Drivers should approach the intersection cautiously, slow down, and follow the "first come, first go" rule or yield to the left. Communication through eye contact and hand signals can also help avoid confusion and ensure safety.

When entering a built-up area or town, the general speed limit is 50 km/h, unless otherwise indicated by road signs. This limit helps ensure the safety of pedestrians, cyclists, and other road users in urban areas.

As the driver, you are responsible for ensuring that all passengers, including children, are wearing their seatbelts correctly. Even though the children are 14 years old, the law generally requires the driver to ensure that everyone in the vehicle is properly secured, regardless of their age.

You’re looking at an Uneven Road Sign.

The Uneven Road sign warns that the road surface ahead is irregular or bumpy, which may affect vehicle control — drivers should reduce speed and proceed with caution.

The sign shown is a Traffic Signal warning sign.

The Traffic Signal warning sign tells drivers to expect a set of traffic lights ahead. It's a cue to slow down and be ready to stop if necessary.

You are looking at a Carriageway Narrows Sign.

Carriageway Narrows sign warns drivers that the road narrows on both sides ahead. Reduce speed and proceed with caution, especially when meeting oncoming traffic.

The indicated sign is Roundabout Coming Up.

Roundabout Coming Up indicates a circular intersection ahead. Drivers must give way to traffic already in the roundabout and follow the circular flow.

The correct answer is "Level Crossing 30m Ahead".

This sign is letting you know there’s a railway crossing just 30 metres ahead. It’s basically saying, slow down and be ready to stop — a train could be coming, so stay alert and approach carefully.

The correct answer is "Motorway".

This sign means you’re entering a motorway — a fast road made for cars and other quick vehicles. People walking, riding bicycles, or driving slow machines are not allowed here.

The correct answer is "Go Straight or Turn Right".

The sign indicates drivers may continue straight ahead or turn right, but left turns are not allowed.

This sign tells drivers to slow down and look out for people crossing the road. Always give way to pedestrians.

Warns drivers to slow down and watch for people crossing the road.