This sign prohibits vehicles exceeding 5 tonnes (laden weight) from entering the road. It’s used to protect roads, bridges, or areas not designed to handle heavy loads.

This sign restricts goods vehicles longer than 10 metres from entering the road ahead. It's used in areas with tight bends, narrow roads, or weight/length restrictions, where long vehicles could pose a hazard or block traffic flow.

This sign means no vehicle is allowed to overtake another on the stretch of road ahead — regardless of the vehicle type. It’s usually placed in dangerous or limited-visibility areas such as bends, hills, or near pedestrian crossings to reduce collision risks. It applies to all vehicles, not just heavy ones.

You should pull into a passing space on your right because it's safer and more common to give way to the vehicle coming from the opposite direction. This helps avoid the need for both vehicles to reverse.

Driving on a wet road can significantly impact visibility due to the glare from reflected light on the water, making it harder to see other vehicles, pedestrians, and road markings, especially at night or in heavy rain, which can significantly reduce your ability to react to potential hazards.

Additionally, fog or mist may develop in wet conditions, further impairing visibility.

It’s important to drive cautiously and adjust speed when road conditions are wet to maintain control and visibility.

If you are driving behind a large goods vehicle that signals left but steers to the right, you should slow down and let the vehicle turn. Large vehicles often need extra space to make turns, and they may signal one direction while steering in the opposite direction to maneuver safely. It’s important to give them room and wait until it's safe to proceed.

When walking with children along a road, it is safest to walk between them and the traffic. This ensures that you are in the position to shield them from any potential dangers coming from vehicles. Always keep children away from the roadside and ensure they are protected from moving vehicles.

Before overtaking a long vehicle, you should:

1. Signal your intention to let other road users know your move.
2. Use your horn (if necessary) to alert the driver of the long vehicle, especially if they might not see you due to blind spots.
3. Ensure the road ahead is clear and that it’s safe to overtake.
4. Execute the maneuver quickly and safely, returning to your lane smoothly.

The safest and most appropriate way to cross a clear road is to walk across it at a steady pace. Running or jumping can increase the risk of tripping or losing balance, while attempting to stop traffic yourself is unsafe and impractical. Always ensure the road is clear and use designated crossings where available.

Road humps (ramps) are designed to slow down vehicles for safety. Driving too fast over them can damage your vehicle and cause discomfort. Always reduce speed when approaching and crossing road humps.

Your reaction time will be much slower when you are tired, as fatigue reduces alertness, concentration, and the ability to respond quickly to hazards. Driving while tired increases the risk of accidents, so it's important to take breaks and rest if you feel drowsy.

In an emergency braking situation, seat belts hold you in place and prevent you from being thrown forward. They are designed to reduce injury by keeping you securely seated, absorbing the force of sudden deceleration.

Carbon fouling on spark plugs usually means that the engine is running too rich (too much fuel relative to air), which can be caused by improper tuning. This can lead to poor combustion and deposits on the spark plug.

Seat belts are fitted in vehicles for safety on both long and short trips. They help protect you in case of an accident, regardless of the length of your journey.

Fog lights are designed to be used in conditions where visibility is seriously reduced, such as during fog, heavy rain, or snow. They provide a low, wide beam of light to illuminate the road directly in front of the vehicle without causing glare, which can help the driver see better in such conditions. They should not be used when visibility is clear or when not required, as they may cause unnecessary distraction to other drivers.

A – Airway: Check if the person's airway is clear and not blocked.
B – Breathing: Ensure the person is breathing properly.
C – Circulation: Check for a pulse and signs of blood circulation.

These steps help assess the victim's condition and provide proper first aid before professional medical help arrives.

If your tyre blows out or you have a tyre burst while the vehicle is in motion, firmly grip the steering wheel and steer straight. Avoid slamming on the brakes, as this can cause you to lose control. Gradually slow down and bring the vehicle to a safe stop. Once stopped, you can assess the situation and take appropriate action.

According to the Ghana Highway Code, Red means: "STOP. Wait behind the stop line on the carriageway."
Amber means: "STOP at the stop line." If you have already crossed the white line when the light turns amber, you should proceed with caution. If you have not crossed the white line yet, you must stop.

Passengers are not allowed to ride in a vehicle that is being towed at any time because it poses significant safety risks, as the vehicle may not be stable or controlled, and there is no proper protection for the passengers during towing.

You’re seeing a Pedestrian Crossing sign.

This sign warns drivers that there is a designated pedestrian crossing ahead. Drivers should reduce speed and yield to pedestrians on or entering the crosswalk.

The road sign shown indicates a Sharp Reverse Curve to Right.

A "Sharp Reverse Curve to Right" sign warns drivers of two sharp bends ahead-first to the right, then immediately to the left. Drivers should slow down and navigate carefully.

That’s a Carriageway Narrows from Right.

Carriageway Narrows From Right alerts drivers that the right edge of the road reduces in width ahead. Keep to the left and drive carefully.

The correct answer is "Compulsory Roundabout".

This sign means you must enter the roundabout and move in the direction of the arrows. Follow the traffic flow — don’t go the opposite way.

The correct answer is "End of Priority Road".

This sign warns that the section of road with priority is ending. Drivers should be ready to give way to cross traffic.

The correct answer is "No Through Road".

Warns that the road ends ahead. Only use it if you have a reason to enter (e.g., visiting someone there).