This sign restricts goods vehicles longer than 10 metres from entering the road ahead. It's used in areas with tight bends, narrow roads, or weight/length restrictions, where long vehicles could pose a hazard or block traffic flow.

This sign prohibits goods vehicles, such as lorries and vans transporting cargo, from entering the road ahead. It’s typically placed in residential areas, city centers, or roads with structural limits, helping reduce noise, traffic, or potential damage.

This sign instructs all drivers to stop when directed by police. It is commonly used at checkpoints or during controlled traffic situations and must be obeyed at all times.

When following a truck on a steep hill, it's important to maintain a safe gap to give yourself enough reaction time and avoid accidents if the truck needs to stop suddenly. It also helps you stay clear of exhaust fumes and allows you to react to any changes in the truck's speed or direction.

The 2-second gap provides an ideal stopping distance under normal driving conditions, allowing enough time to react and brake safely if the vehicle in front stops suddenly.

To correct a rear-wheel skid, you should steer in the same direction as the skid (steer into it). This helps you regain control by aligning the wheels with the direction of travel. Avoid sudden braking or acceleration, as this can make the skid worse.

High heels are not recommended or accepted for safe driving because they reduce your ability to properly control the pedals. They can slip off or get caught, making it harder to apply the right amount of pressure on the brake or accelerator.

Rearview mirrors help drivers stay aware of traffic behind them, ensuring safe lane changes, turns, and reversing.

The total stopping distance is the sum of the thinking distance and the braking distance.

So, for this vehicle:

• Thinking distance = 18 metres
• Braking distance = 55 metres

Total stopping distance = 18 metres + 55 metres = 73 metres

The vehicle's total stopping distance will be 73 metres.

When this indicator light comes on, it usually signals that there is an issue with the engine oil level or pressure. You should check the engine oil level immediately to ensure that the engine is properly lubricated. Low engine oil can cause significant damage to the engine if left unchecked. It's important to top up the oil if it's low, or if the light stays on even after topping up, to have the engine checked by a mechanic.

If your vehicle breaks down in traffic or on the highway, you should get your vehicle off the road and place an Advance Warning Triangle at 46 metres to the front and rear. This will help alert other drivers to the breakdown, ensuring safer conditions for everyone on the road.

A triangular road sign would most likely indicate a "low bridge ahead" as triangular signs are typically used to warn drivers of potential hazards on the road, and a low bridge is considered a hazard that needs attention.

This warning sign indicates a steep hill ahead with an upward incline. Drivers should prepare for the ascent by selecting an appropriate gear and maintaining a steady speed to avoid straining the engine.

Making a U-turn on a highway is dangerous because Traffic travels faster on highways, and other drivers may not expect a sudden turn. This increases the risk of collisions. Instead, use designated exits or turn-around points to change direction safely.

The sign shown is a Traffic Signal warning sign.

The Traffic Signal warning sign tells drivers to expect a set of traffic lights ahead. It's a cue to slow down and be ready to stop if necessary.

A 'Left Bend' sign warns drivers that the road curves to the left ahead. Drivers should slow down and follow the bend safely.

You’re looking at an Uneven Road Sign.

The Uneven Road sign warns that the road surface ahead is irregular or bumpy, which may affect vehicle control — drivers should reduce speed and proceed with caution.

The correct answer is "Priority To Vehicle From Opposite Direction".

This sign means cars coming from the other side have the right to go first. You must wait until the road is clear before you move.

The correct answer is "Give Way".

The “Give Way” sign tells drivers to slow down and allow vehicles on the main road to pass before joining or crossing.

The correct answer is "No Through Road on Right".

This sign warns that the road to your right ends ahead. Don’t turn right unless you have a reason to go there.